Dzień dobry, próbuję podpiąć zestaw, używam kabla drukarkowego USB A-B.

jednak avrdude wywala dziwny błąd:
Please wait ...

avrdude_mk.exe: set SCK frequency to 187500 Hz
avrdude_mk.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude_mk.exe: Device signature = 0x1e9502
avrdude_mk.exe: Expected signature for ATMEGA8 is 1E 93 07
avrdude_mk.exe: reading signature memory:

Reading | ################################################## | 100% 0.00s

avrdude_mk.exe: safemode: Fuses OK

avrdude_mk.exe done. Thank you.

Compiled special for http://forum.atnel.pl (v5.11.1)



avrdude_mk.exe: set SCK frequency to 187500 Hz
avrdude_mk.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude_mk.exe: Device signature = 0x1e9502
avrdude_mk.exe: Expected signature for ATMEGA8 is 1E 93 07
avrdude_mk.exe: reading signature memory:

Reading | ################################################## | 100% 0.00s

avrdude_mk.exe: safemode: Fuses OK

avrdude_mk.exe done. Thank you.

Compiled special for http://forum.atnel.pl (v5.11.1)

Jakiej wersji mkavrcalculatora używasz?