Poniżej kod + komunikat z Eclipse.
[syntax=c]#include <avr/io.h>
#include <util/delay.h>
int main(void)
{
DDRB |= (1<<PB1);
DDRB |= (1<<PB2);
while(1)
{
PORTB ^= (1<<PB1);
_delay_ms(100);
PORTB ^= (1<<PB2);
_delay_ms(100);
}
}[/syntax]
Quote:
Launching C:\eclipse\WinAVR\bin\avrdude -pm88p -cusbasp -Uflash:w:TestAVR.hex:a
Output:
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e930f
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "TestAVR.hex"
avrdude: input file TestAVR.hex auto detected as Intel Hex
avrdude: writing flash (144 bytes):
Writing | ################################################## | 100% 0.07s
avrdude: 144 bytes of flash written
avrdude: verifying flash memory against TestAVR.hex:
avrdude: load data flash data from input file TestAVR.hex:
avrdude: input file TestAVR.hex auto detected as Intel Hex
avrdude: input file TestAVR.hex contains 144 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 0.04s
avrdude: verifying ...
avrdude: 144 bytes of flash verified
avrdude done. Thank you.
avrdude finished
Statystyki: Napisane przez bert1223 — 14 gru 2014, o 21:36
]]>
