Kod:
[syntax=c]#define F_CPU 8000000UL // 8 MHz
#include <avr/io.h>
#include <util/delay.h>
int main(void)
{
// Ustaw PC0, PC1 i PA0 jako wyjścia
DDRC |= (1 << PC0) | (1 << PC1);
DDRA |= (1 << PA0);
while (1)
{
// Zmiana stanu wszystkich trzech pinów
PORTC ^= (1 << PC0) | (1 << PC1);
PORTA ^= (1 << PA0);
_delay_ms(500);
}
}[/syntax]
output avrdude:
[syntax=c]avrdude: set SCK frequency to 93750 Hz
avrdude: AVR device initialized and ready to accept instructions
avrdude: device signature = 0x1e9502 (probably m32a)
avrdude: erasing chip
avrdude: set SCK frequency to 93750 Hz
avrdude: reading input file C:\Users\Krzysztof\Documents\Atmel Studio\7.0\XC8Application1\XC8Application1\Debug\XC8Application1.hex for flash
with 178 bytes in 1 section within [0, 0xb1]
using 2 pages and 78 pad bytes
avrdude: writing 178 bytes flash ...
Writing | ################################################## | 100% 0.32s
avrdude: 178 bytes of flash written
avrdude: verifying flash memory against C:\Users\Krzysztof\Documents\Atmel Studio\7.0\XC8Application1\XC8Application1\Debug\XC8Application1.hex
Reading | ################################################## | 100% 0.15s
avrdude: 178 bytes of flash verified
avrdude done. Thank you.[/syntax]
Niestety nic nie mruga. Załączam zdjęcie zestawu, może jakaś zworka źle podpięta?
jeszcze komenda avrdude do wgrania kodu:
avrdude -e -P usb -c USBasp -p m32a -U flash:w:"$(ProjectDir)Debug\XC8Application1.hex":a -B 8Statystyki: Napisane przez Kyeiv — 7 sie 2025, o 14:54
]]>
